Fox Valve Has One Core Technology:
Venturi Engineered Products Since 1961

Site menu:

Fox Venturi Eductors for
Activated Carbon Injection (ACI)

for Mercury-Reduction and Hg-Capture


Hundreds of Fox Eductor + Blower Systems are now installed at power plants as the preferred solution for 24/7 reliable injection of PAC into stacks, ducts, boilers, and kilns:




Fox Venturi Eductor injecting sorbent from a screw feeder into a hot flue gas duct


Materials of Construction


With hundreds of ACI eductors in the field since the 1980's, extensive feedback from customers and site visits have enabled Fox Valve to extensively modify our activated carbon eductor designs to enhance longevity and performance.

Brominated PAC
- Fox has extensive experience with the simultaneous corrosive and erosive effects of
brominated PAC.

Some of the many available materials of construction:



Venturi Eductors are used to eliminate rotary valves for reliable, 24/7 conveying



Fox Solids Conveying Eductors are available with replaceable ceramic liners for abrasion resistance



Fox Venturi Eductors for FGD/Flue Gas Desulfurization
Limestone, Trona, Calcium Carbonate Injection

for NOx and SOx Reduction


Since 1978, Fox Eductor + Blower Systems have been used to convey limestone, Trona, calcium carbonate, sodium bicarbonate, etc. into stacks and ducts for 24/7 reliable mitigation of NOx and SOx.


  • Distances up to 1,000 ft.
  • Line splits to 4, 8, 16 (or more) injection lances, nozzles
  • Rates up to 20,000 lb/hr


Injecting Sorbents for FGD (Flue Gas Desulfurization) into Fluidized Beds and Boilers with Fox Eductors


Since 1978...

Fox eductors have been used to inject sorbents into fluidized bed boilers to capture SOx, creating synthetic gypsum or other byproducts that fall out the bottom of the fluid bed boilers.

With pressures in the bed up to 2 to 3 psig, using rotary airlocks against this high backpressure almost certainly creates a blowback, fugitive dust, and eventually an airlock failure/reliability problem.

Fox eductors have been used with many, many different types of sorbents, including hydrated lime - a notoriously difficult material to handle and convey.

Conveying Hydrated Lime w/ Fox Eductors.



Although by no means perfect in this application, Fox eductors have proven to be an excellent solution to a very difficult problem. Most customers procure two stainless eductors, keeping one in an acid bath or furnace to dissolve or bake off the inevitable build-up within the eductor when conveying hydrated lime.

Request Additional Technical Information:



Case Study #52 -
Convey Hydrated Lime in FGD



This schematic shows a typical Fox additive injection system, with a small Rotron blower running at 2­3 psig driving an eductor